You have to press the tiny navigation icons with the very tips of your fingers, something that gets even more difficult in colder climes. Thankfully, there are larger, easier to press icons for adjusting exposure compensation, white balance, focus, and choosing scene modes. For more comments on the design, see the slide show.
The 40GB model will hold almost 5. It also shoots photos at native 1. Unlike the higher-end SR7 , there's relatively little in the way of manual controls--just those mentioned previously. Since I don't normally shoot people when testing camcorders, I did overlook an interesting feature in my evaluation of the SR7, which also appears in the SR5: Face Index. This will provide thumbnails of every recognizable face in a clip and allow you to jump directly to that bit of the video during playback.
Other post-shoot-friendly features include a mini-HDMI connector--though the cables are still quite pricey--and a bundled dock with one-button disc burn. By most performance measures, the SR5 fares okay. From a cold start, it takes about 8. The SteadyShot image stabilization works well throughout the zoom range and doesn't seem to mess with panning, and the autoexposure adjusts accurately and quickly to changes in scene illumination.
After correcting the original service problem, perform the following. Boards requiring use of unleaded solder are printed with the lead- free mark LF indicating the solder contains no lead. Caution: Some printed circuit boards may not come printed with the lead free mark due to their particular size. Unleaded solder has the following characteristics.
Ordinary soldering irons can be used but the iron tip has to be applied to the solder joint for a slightly longer time. Soldering irons using a temperature regulator should be set to about Caution: The printed pattern copper foil may peel away if the heated tip is applied for too long, so be careful!
This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.
Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock. Never push objects of any kind into the set through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the set. Do not use attachments not recommended by the manufacturer, as they may cause hazards. Unplug the set from the wall outlet before cleaning or polishing it.
Do not use liquid cleaners or aerosol cleaners. Use a cloth lightly dampened with water for cleaning the exterior of the set. Do not use power-line operated sets near water — for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, etc. Route the power cord so that it is not likely to be walked on or pinched by items placed upon or against them, paying particular attention to the plugs, receptacles, and the point where the cord exits from the appliance.
Do not place the set on an unstable cart, stand, tripod, bracket, or table. The set may fall, causing serious injury to a child or an adult, and serious damage to the set. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer. The slots and openings in the cabinet are provided for necessary ventilation.
To ensure reliable operation of the set, and to protect it from overheating, these slots and openings must never be blocked or covered. For added protection for this set during a lightning storm, or when it is left unattended and unused for. This will prevent damage to the set due to lightning and power-line surges.
Unplug the set from the wall outlet and refer servicing to qualified service personnel under the following conditions:. Adjust only those controls that are specified in the operating instructions.
Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the set to normal operation. Do not attempt to service the set yourself as opening or removing covers may expose you to dangerous voltage or other hazards. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have the same characteristics as the original parts.
Unauthorized substitutions may result in fire, electric shock, or other hazards. Upon completion of any service or repairs to the set, ask the service technician to perform routine safety checks as specified by the manufacturer to determine that the set is in safe operating condition. Before operating the unit, please read this manual thoroughly, and retain it for future reference. Replace the battery with the specified type only.
Otherwise, fire or injury may result. For more information regarding. Caution: Do not handle damaged or leaking Lithium-Ion batteries. The model and serial numbers are located on the bottom. Record the serial number in the space provided below.
Refer to these numbers whenever you call your Sony dealer regarding this product. Responsible Party: Sony Electronics Inc.
You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:. The supplied interface cable must be used with the equipment in order to comply with the limits for a digital device pursuant to Subpart B of Part 15 of FCC Rules.
Pushing the plug forcibly into the terminal will damage the terminal and may result in a malfunction of your camcorder. When a drop occurs, or under a nongravity condition, the block noise made when this function is activated by the camcorder may also be recorded. If you do so, your camcorder may not operate correctly. Doing so may damage the hard disk drive of your camcorder.
0コメント